Product location >Product

S20 wet-type brake bridge
Introduce ：



S20 wet-type brake bridge structure features:
Structural characteristics of
Drive axle adopts double reduction structure.
Main transmission for the spiral bevel gear, the bearing capacity is big. High efficiency.
Round edge to the planetary reduction structure.
Main part is equipped with ordinary bevel gear differential, simple structure, flexible differential.
For cast steel bridge shell material, good rigidity.
Brake for the enclosed multi-disk wet brake, installed on the wheel edge before reduction planetary gear, braking half shaft, hydraulic pressure, the spring release, good braking performance.
Suitable for 5 t - 8 t JiaoJieChe, cars, and 2 t loader roller.
S20 wet-type brake bridge technology parameters:

The main transmission ratio

6.667 

Round edge ratio 


 3.23

The total transmission ratio

 21.53

Bridge load 


 12000Kg

The input torque 


 900N.m

Brake oil pressure 


 9.8Mpa

Tubing interface 


M12×1.25 

Braking torque

 24480N.m

Brake normally the amount of discharge of oil

 49ml

Next： Ultra-low laundry list special loader bucket On： The parking brake
Copyright ：Feicheng the power machinery co., LTD
  Technical support ：Zhongshangwangluo
Today's traffic ：2  Traffic yesterday ：0 Total visits ：4733    [Management]		 TEL：0538-3393867  0538-3393866    FAX：0538-3393868
ADDRESS：Status new city development zone in shandong province
EMAIL：zljx01@163.com